Polyform US A Series Buoys

Inflation Guide for Polyform US Fenders

Product	Max. Circumference
A Series
A-0	25.1 in.	63.8 cm
A-1	34.5 in.	87.7 cm
A-2	45.5 in.	115.6 cm
A-3	53.4 in.	135.6 cm
A-4	64.4 in.	163.5 cm
A-5	84.8 in.	215.3 cm
A-6	106.8 in.	271.2 cm
A-7	122.5 in.	311.0 cm
F Series
F-1	18.8 in.	47.9 cm
F-02	23.6 in.	59.8 cm
F-2	25.7 in.	65.4 cm
F-3	25.7 in.	65.4 cm
F-4	26.7 in.	67.8 cm
F-5	34.5 in.	87.7 cm
F-6	34.5 in.	87.7 cm
F-7	47.1 in.	119.6 cm
F-8	47.1 in.	119.6 cm
F-10	56.5 in.	143.6 cm
F-11	66.6 in.	169.1 cm
F-13	91.1 in.	231.3 cm
G Series
G-1	11.0 in.	27.9 cm
G-2	14.1 in.	35.9 cm
G-3	17.3 in.	43.9 cm
G-4	20.4 in.	51.8 cm
G-5	27.6 in.	70.2 cm
G-6	34.5 in.	87.7 cm
HTM Series
HTM-1	19.8 in.	50.2 cm
HTM-2	26.7 in.	67.8 cm
HTM-3	33.0 in.	83.7 cm
HTM-4	42.4 in.	107.7 cm

Note: Remove white plastic screw from the valve (located near the ropehold) and when inflating with an air compressor, set the PSI to 2 lbs / 0,15 bar of pressure at 20˚C. When inflating without a pressure gauge, fill the buoy or fender until the walls are fully expanded, but make certain you can depress the wall at least 1/4 inch with light hand pressure. Measure the circumference and compare it with the inflation chart for proper pressure. Overinflation will reduce the performance of the product and may cause premature failure. Overinflation voids the warranty.

The Polyform A Series all-purpose buoy, with the signature “blue ropehold” has proven itself in the most adverse conditions and is used by more fishermen than all other buoys combined.

Fender Size

PVC Fender Colour

SKU: N/A Categories: Fenders, Polyform US Fenders

The Polyform A Series all-purpose buoy, with the signature “blue ropehold” has proven itself in the most adverse conditions. More fishermen use Polyform A Series than all other buoys combined. You name it — ocean, sea, river or lake — and the A Series has been there. Put your trust in Polyform’s most versatile and well-known product.