Inflation Guide for Polyform US Fenders
| Product |
Max. Circumference |
| A Series |
|
|
| A-0 |
25.1 in. |
63.8 cm |
| A-1 |
34.5 in. |
87.7 cm |
| A-2 |
45.5 in. |
115.6 cm |
| A-3 |
53.4 in. |
135.6 cm |
| A-4 |
64.4 in. |
163.5 cm |
| A-5 |
84.8 in. |
215.3 cm |
| A-6 |
106.8 in. |
271.2 cm |
| A-7 |
122.5 in. |
311.0 cm |
| F Series |
|
|
| F-1 |
18.8 in. |
47.9 cm |
| F-02 |
23.6 in. |
59.8 cm |
| F-2 |
25.7 in. |
65.4 cm |
| F-3 |
25.7 in. |
65.4 cm |
| F-4 |
26.7 in. |
67.8 cm |
| F-5 |
34.5 in. |
87.7 cm |
| F-6 |
34.5 in. |
87.7 cm |
| F-7 |
47.1 in. |
119.6 cm |
| F-8 |
47.1 in. |
119.6 cm |
| F-10 |
56.5 in. |
143.6 cm |
| F-11 |
66.6 in. |
169.1 cm |
| F-13 |
91.1 in. |
231.3 cm |
| G Series |
|
|
| G-1 |
11.0 in. |
27.9 cm |
| G-2 |
14.1 in. |
35.9 cm |
| G-3 |
17.3 in. |
43.9 cm |
| G-4 |
20.4 in. |
51.8 cm |
| G-5 |
27.6 in. |
70.2 cm |
| G-6 |
34.5 in. |
87.7 cm |
| HTM Series |
|
|
| HTM-1 |
19.8 in. |
50.2 cm |
| HTM-2 |
26.7 in. |
67.8 cm |
| HTM-3 |
33.0 in. |
83.7 cm |
| HTM-4 |
42.4 in. |
107.7 cm |
Note: Remove white plastic screw from the valve (located near the ropehold) and when inflating with an air compressor, set the PSI to 2 lbs / 0,15 bar of pressure at 20˚C. When inflating without a pressure gauge, fill the buoy or fender until the walls are fully expanded, but make certain you can depress the wall at least 1/4 inch with light hand pressure. Measure the circumference and compare it with the inflation chart for proper pressure. Overinflation will reduce the performance of the product and may cause premature failure. Overinflation voids the warranty.
The Polyform HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications including stand-off for larger vessels between 20 to 50 feet in length. Vertical ribs for extra protection, reinforced tube ends and extra wall thickness to resist punctures and tears are just a few of the features this high-quality fender has to offer.
Reviews
There are no reviews yet.